Dette FWD-chassisettet tar det revolusjonerende M-07-konseptet og fyller esken med en rekke tilleggsdeler, valgt av Tamiya Racing Factory (TRF)-teamet for et racingoppsett. Dette er rett og slett mye for pengene, for de som ønsker å komme rett inn i racing, eller oppnå en race spec’et bil uten å måtte velge masse Hop-Up-alternativer og reservedeler selv.
M-07 er et fantastisk chassis, og gir deg enorm kjøreglede.
M-07 chassiset kan valgfritt monteres med 225mm (M) eller 239mm (L) hjulbase.
Må kompletteres med:
- Radio og mottaker
- Servo (low profile)
- Fartskontroller
- Motor (540 størrelse)
- NiMH eller LiPO batteri
- Egnet batterilader
- Karosseri (M-chassis)
- PS lakk
Mere info på engelsk:
 |
|
 |
|
★Left: Long arms and steering linkage components optimize damper leverage ratio. The chassis’ camber can also be adjusted.★Right: Adjust the M-07 Concept’s rear toe angle via the insertion of spacers where the suspension mount parts are attached. |
 |
|
 |
|
★Left: One of the key points is the easy-access differential unit, which can be removed and changed from the underside.★Right: Enjoy silky-smooth power from your chassis thanks to full ball bearings, universal drive shafts and gear differential unit. |
Specifications
●Length: 332mm (including bumper) ●Width: 164mm ●Wheelbase: 225mm or 239mm (Selectable) ●Monocoque Frame ●Front-Midship Motor, Front-Wheel Drive ●Gear Differential ●3-Piece Steering Tie-Rod ●4-Wheel Independent Double Wishbone Suspension ●CVA Oil Dampers ●Gear Ratio = 5.78:1 using included 20T pinion gear (7.22:1 – 4.81:1 available with separately sold pinion gears) ●Requires an Electronic Speed Controller (sold separately) |
This R/C FWD chassis kit takes the revolutionary M-07 Concept and pairs it with a range of option parts, selected by the Tamiya Racing Factory (TRF) team for a racing setup. This is a great value-for-money option for those who want to get straight into racing, or achieve a race-spec car without having to select Hop-Up Option and Spare parts themselves.
Featured Components
• M-07 Concept High-Traction Lower Deck (54812)
• TRF Special Damper (Hard Black Coating) (42102)
• M-07 Concept Reinforced C Parts (Uprights) 2pcs. (54810)
• M-07 Concept Reinforced D Parts (Suspension Arms) 2pcs. (54811)
• 33mm Double Cardan Joint Shaft (2pcs.) (42312)
• Clamp Type Aluminum Wheel Hub (5mm Thick) (53823)
• Rear Stabilizer
• Aluminum Cup Joint for TA06 Gear Differential Unit (2pcs.) (54532)
• Hard Fluorine Coated 0.6 Aluminum Pinion Gear (20T) (53509)
• φ2.6mm Titanium Coated Suspension Shaft Set for Reversible Suspension (53917)
• 46mm Titanium Coated Suspension Shafts 2pcs. (53851)
• 3x106mm Aluminum Turnbuckle Shaft (54756)
• 1/10 scale R/C chassis assembly kit. Length: 332mm.
• Includes dedicated carbon fiber battery holders unique to this kit.
• The chassis has superb rigidity thanks to reinforced upright and suspension components, as well as a high- traction lower deck.
• A highly efficient drivetrain employs 33mm double cardan joint shafts and aluminum joint cups, plus a durable fluorine coated aluminum 20T pinion gear.
• Highly agile suspension utilizes TRF Special Dampers, rear stabilizer and titanium coated suspension shafts.
• Also included are aluminum hex hubs and 3x106mm turnbuckle shaft.
• Requires: 2-Channel Radio, servo, motor, ESC, 7.2-7.4volt battery pack & compatible charger, m-chassis body set, and Tamiya PS paint.
