- Produktinfo
- Produktanmeldelser (0)
Produktinfo
RC4WD Over/Under Drive Transfer Case
Specifications:
- 1.47 / 1 Gearing
- .8 Mod Gears
- Hardened Steel Gears
- Cast Casing
- Wide Gears
- Has same mounting as our popular Hammer Transfer Case
- Output Shaft OD: 0.19in / 5.0mm
- Total Weight: 6.21oz / 176g
What´s Included:
- 1x RC4WD Over/Under Drive Transfer Case
- 1x 16T Gear
- 1x 17T Gear
- 1x 19T Gear
- 1x 20T Gear
- 1x M3 x 6mm Steel Button Head Cap Screws (Black)
- 1x M3 x 10mm Steel Button Head Cap Screws (Black)
Replacement Hardware:
Notes:
- Fits RC4WD Trail Finder 2 "LWB" RTR w/Mojave II Four Door Body Set (Z-RTR0030)
- Fits RC4WD Trail Finder 2 Truck Kit "LWB" w/ Mojave II Four Door Body Set (Z-K0058)
- Fits RC4WD Trail Finder 2 Truck Kit "LWB" 1/10 Scale Long Wheel Base Chassis Kit (Z-K0059)
- If installed on our Gelande II truck, (O/D TC) Lower 4 Link Mount w/ Battery Tray for Gelande II (Z-S1899) is required.
- 15T/22T (Stock) : 1 : 1.47 Gear Ratio - Front axle goes same speed as rear
- To change the gear ratio remove the cover on the side with the two shafts.
- The following are the gear combinations of Rear Output to Front Output:
- 17T / 19T combo = 1:1.27 front axle will rotate 27% faster than rear
- 16T / 20T combo = 1:1.33 front axle will rotate 33% faster than rear
- 19T / 17T combo = 1:1.42 front axle will rotate 42% faster than rear
- 20T / 17T combo = 1:1.57 front axle will rotate 57% faster than rear
- 20T / 16T combo = 1:1.67 front axle will rotate 67% faster than rear