PERFORMANCE
• 

EQUIPMENT NEEDED (not included)

Inner Fenders
• The inner fender is directly fixed to the frame to reduce the flex and bending of the chassis and parts, it also reduces external objects to entering to the chassis during driving.

Front weight balance
• GS02F´s weight balance designed to be placed on the forward of the chassis. This will increase the tire tracktion to the front wheel to provide better crawling on a high tilt angle rocks and better driving performance when hill climbing and this will help minimizing the vehicle´s rolling over when climbing.

Standard Pack(Max width: 156mm)

Shorty Pack(Max width: 98mm)

Chassis Mounted Servo system

with panhard bar
• GS02F steering system has a steering servo on the frame just like a 1:1 real car. It is designed to make it as closed to the zero bump steer so bump steer movement does not appear by front wheel suspension movements, so we ended up with maximizing the steering performance of the vehicle. In addition, the Panhard-bar is designed to avoid interference with nearby parts, so that the front suspension and shocks can move freely without any loss.

Drivelines
• The drive lines of the front and rear axles are arranged in straight-line to reduce the fatigue stress of the universal shaft and reduce the loss of driving power by providing efficient driving lines.

Transmission
• The GS02F transmission is designed to look as a real 1:1 scale vehicle, and provides the best performance according to the driving situation.

Overdrive
• Overdrive means, front and rear wheels rotate at the different speeds.
  The GS02F transmission is designed to rotate the front wheel faster than the rear wheel.

Better steering radius
• Vehicles with overdrive on the front axle has an improved steering radius compared to non-overdrive vehicles, making it easier to control when driving on the rough surfaces.

Better climbing
• Increasing of the tire traction allows the vehicle to pass through steep slopes and obstacles without lifting the front of the body upward.

2-speed HI/LO transmission
• The 1st gear is for hardcore rock crawling and the 2nd gear is for hill climb or high-speed driving.

torque Twist Reduce transmission
• GS02F transmission is designed to drive in a stable position without pulling the balance of power transmitted to the axle. The front and rear universal shafts based on the transmitter each rotates clockwise and counterclockwise, this compensates for the forces acting on the opposite rotational forces due to the action(torque) and reaction(reverse torque) because of that this vehicle can run in a super stable conditions.

Dual slipper clutch

The slipper pads are designed to hold the spur gears evenly to allow more precise setting.

All metal internal gears

GA44 Axle
• GA44 axle is designed with the hardcore rock crawler in mind. Axles are made of high-strength meterials, and it will look and perform optimum off-road perfermance as real 1:1 vehicle when 4-Link suspensions added.
  The GA44 axle housing is a durable one-piece type. The angle of the differential cover is designed to reduce the risk of damage due to frontal impact and is therefore very suitable for off-road driving.

Hi steer knuckle arm
• By increasing the approach angle, you can over climb the obstacles more easily than a typical trial trucks.

adjustable castor
• The GA44 front axle can be adjusted to the steering style to have a smooth and short turn angle depending on the driving style or to adjust to improve straight stability by changing the caster angle.

Metal diff locker

Hardened carbon steel CVA kit

SD scaler shock absorber
• SD Scaler Shock is a Coil-over styled oil shock absorber optimized for the scale trucks. The oil filled inside the shock minimizes splash when the vehicle is driven, and provides a high-durability aluminum shock body with 3.5mm heavy duty shock shafts are added, these will help you to drive roughly on rough surfaces. Beginners also can easily assemble this shock and change setups, and the adjustable nut makes it easy to adjust the ride-hight so you can quickly change your car setup even when driving condition changes.

MT-1903 1.9 INCH M/T OFF-ROAD TIRE
• MT 1903 off-road tire made of super soft compound material provides high traction to the surface. The treads of tire pattern are suitable for off-road driving and are designed with large diameter that enables to run smoothly on any uneven road surface.

SPEC
• Tire Height: 109mm
  Tire Width: 40mm
  Inner Diameter: 48mm (1.9")

1.9INCH NR03 WHEEL
• Width : 23mm
  Diameter : 48mm (1.9")
  Offset : 0.5mm positive offset
  Hex mount : 12mm

OPTION PARTS

Not included in stock kit

KOMODO snorkel (GM60195)

Front

Rear

• Width : 230mm
  Height : 245mm
  Height(with out roof rack) : 213mm
  Length : 525mm
  Wheel base : 313mm
  
  Ground clearance : 69mm
  Weight (no electronics) : 2.08kg